Back
Automatically translated version. May contain inaccuracies compared to the original.
The Department of Municipal Security of Kyiv City State Administration plans to spend about 6 million hryvnias on the purchase of 200,25 thousand square meters of polyethylene film. The material is intended to replenish Kyiv's material reserve in case of emergencies and to mitigate their consequences.
This was learned by KV from an announcement in the Prozorro electronic public procurement system.
As Kyiv authority “KyivVlada” learned after additional analysis of procurement documents, funding is provided from the local budget under the city civil protection program for 2024–2028 years.
They are ordering transparent film of brand “P” in the form of a sleeve with a width of 1500×2 mm. Allowed width deviation is 5%. The thickness should be 200 μm with a deviation of 10%. The film length per roll is 50 linear meters.
According to nominal parameters, one roll contains about 150 square meters of film. Accordingly, the reported volume of 200 250 square meters is approximately 1 335 rolls.
The mass of one roll should not exceed 30 kg. The film should be wound onto a sleeve with an inner diameter of 76 mm. Winding must be even and tight, without misalignment of the sheet at the edge.
The surface of the film must be smooth. Holes, cracks, pressed folds, pronounced waviness, specks, and unmelted material are not allowed. An external odor is also prohibited.
On each roll the manufacturer, film brand, thickness, and width must be indicated. Also required are length, area, batch number, production date, gross mass, and designation of regulatory documents. The packaging must protect the material from external influence.
Participants are subjected to a separate requirement to test the product. Before submitting a proposal, they must provide the customer with a sample of the film weighing 10 kg free of charge, i.e., one roll. Along with the sample, a passport or quality certificate and the manufacturer's normative-technical documentation are required.
During inspection, width, thickness, transparency, winding quality, surface, odor, and labeling will be evaluated. A negative conclusion or non-compliance with technical conditions is grounds for rejecting the proposal. If the participant is not a manufacturer, they must confirm ties with the manufacturer or an official dealer. For this, a dealer agreement, letter of representation, guarantee letter, or certificate of an authorized partner will be accepted.
The film must be delivered by 30 October 2026 year. The main delivery location is the warehouse on Kyivska Street, 144 in Obukhiv. The draft contract also allows delivery to a warehouse in Kyiv. Delivery and bringing the goods to the warehouse will be at the supplier's expense.
Payment is provided after actual delivery. The department will have up to ten working days after acceptance of the goods and the issuance of the expenditure invoice.
For substandard product a penalty of at least 20% of its value is provided. For late delivery, a penalty of 0,1% of the value of the undelivered goods will accrue for each day. If the delay exceeds 30 days, an additional 7% will be charged.
About what Kyiv and Kyiv region bought last week is shown in the KV video.
Earlier KV reported that the institutions of education in the Sviatoshyn district plan to purchase at least 895 thousand bags for trash of four sizes. The expected cost of the procurement is about 1,4 million hryvnias.
Document: PDF proof of the republished news item "Департамент муніципальної безпеки КМДА на 6 млн гривень замовив поліетиленової плівки" after a recorded deletion or page unavailability. Source: KyivVlada.
